maxresdefault

Siliconi Pulimak 1

Pulimak 1 is a non chlorinated spot lifter spray which is used to remove oily or greasy spots on any type of fabric during garment production. Siliconi Pulimak 1 consists of 3 parts: solvent, powder, and gas. Once you press the nozzle, the gas propels the solution on to the fabric. The solvent dissolves the stain and the powder then absorbs the solvent and grease. Siliconi Pulimak 1 comes in 400ml cans.

Siliconi Pulimak 1

Pulimak 1 is a non chlorinated spot lifter spray which is used to remove oily or greasy spots on any type of fabric during garment production. Siliconi Pulimak 1 consists of 3 parts: solvent, powder, and gas. Once you press the nozzle, the gas propels the solution on to the fabric. The solvent dissolves the stain and the powder then absorbs the solvent and grease. Siliconi Pulimak 1 comes in 400ml cans.

Benefits of Siliconi Pulimak 1

 

Can be used with any type of fabric from cotton to synthetics

Does not contain chlorine which is a dangerous carcinogenic agent

No halos or white rings at all during usage

Does not damage or change the colour of the fabric whatsoever

In compliant with ROHS and Oeko-Tex

Fast evaporation and extremely easy removal with brush or compressed air.

No coagulation or residual chemical blockage on the spray nozzle, which means full utilization of the chemical component in each can

All Siliconi cans are resistant to extreme pressure (18 bars)

 

Best Usage

Best Usage

For best usage in removing stains, we recommend for best usage in removing stains, we recommend the following instructions:

1. Shake the can thoroughly before using. Without proper shaking, there is a risk of only propelling the powder out of the can and not the solvent.

2. For light fabrics, spray 1 – 3 puffs directly on the stain from around 25 – 30 cm away. For heavy fabrics, spray 1 – 3 puffs directly on the stain from around 10 cm away. It is important to spray directly on the stain to ensure the spray will work. For heavy fabrics, it is essential to spray an adequate amount to prevent any leftover stain from resurfacing.

3. Leave the spray to dry (become white) for a few moments. Then use either a brush, or an air gun from between 70 cm – 1 m away to remove the powder. Only eliminate the solution once fully dried, otherwise, the effect may be minimized.

For best usage in removing stains, we recommend for best usage in removing stains, we recommend the following instructions:

1. Shake the can thoroughly before using. Without proper shaking, there is a risk of only propelling the powder out of the can and not the solvent.

2. For light fabrics, spray 1 – 3 puffs directly on the stain from around 25 – 30 cm away. For heavy fabrics, spray 1 – 3 puffs directly on the stain from around 10 cm away. It is important to spray directly on the stain to ensure the spray will work. For heavy fabrics, it is essential to spray an adequate amount to prevent any leftover stain from resurfacing.

3. Leave the spray to dry (become white) for a few moments. Then use either a brush, or an air gun from between 70 cm – 1 m away to remove the powder. Only eliminate the solution once fully dried, otherwise, the effect may be minimized.

Storage

 

Store in a ventilated place and keep away from children, flame, heat, humidity, and sunlight. Do not puncture or attempt to open the can and dispose of the can correctly after use.

Availability

 

We offer Siliconi Pulimak 1 Spray comes in 400 ml cans. If you are interested in this product, please get in touch with us through the inquiry form below or e-mail us directly at info@rapos.com

Storage

 

Store in a ventilated place and keep away from children, flame, heat, humidity, and sunlight. Do not puncture or attempt to open the can and dispose of the can correctly after use.

Availability

 

We offer Siliconi Pulimak 1 Spray comes in 400 ml cans. If you are interested in this product, please get in touch with us through the inquiry form below or e-mail us directly at info@rapos.com

Inquiry Form